Minimizing envelope leakage is a critical component of improving energy efficiency in homes, as it reduces unintended air infiltration and exfiltration through the building envelope. This concept is addressed in the LEED for Homes Rating System (v4) under the Energy and Atmosphere (EA) category, specifically in credits related to Air Infiltration and Building Envelope Performance. According to the LEED Reference Guide for Homes Design and Construction (v4), the primary method to minimize envelope leakage is to install a continuous air barrier: EA Prerequisite: Minimum Energy Performance To reduce air infiltration, projects must include a continuous air barrier system that is sealed at all penetrations, joints, and interfaces to prevent air leakage. The air barrier must be installed around the entire building envelope, including walls, roofs, and floors. Source: LEED Reference Guide for Homes Design and Construction, v4, Energy and Atmosphere Prerequisite: Minimum Energy Performance, p. 112. Additionally, the LEED v4.1 Residential BD+C rating system reinforces this requirement: EA Credit: Air Infiltration Install a continuous air barrier system to control air leakage through the building envelope. The air barrier must be airtight, durable, and continuous, with all seams, penetrations, and transitions sealed. Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online. A continuous air barrier is a system of materials (e.g., house wraps, sealed drywall, or spray foam) that forms a complete barrier to air movement, significantly reducing energy losses due to leakage. This is a proactive design and construction strategy to achieve energy efficiency goals. Why not the other options? A . Installing a drainage plane: A drainage plane (e.g., house wrap or rainscreen) is designed to manage water infiltration and protect the building from moisture damage, not to control air leakage. While it may contribute to overall building durability, it does not address envelope air tightness. Reference: LEED Reference Guide for Homes Design and Construction, v4, Sustainable Sites Credit: Rainwater Management, p. 76, which discusses drainage planes in the context of moisture control. B . Conducting a blower door test: A blower door test is a diagnostic tool used to measure air leakage in a building, not to minimize it. It quantifies the air tightness of the envelope (in air changes per hour, ACH) but does not physically reduce leakage. It is required for verification in LEED v4 (EA Credit: Air Infiltration) but is not a solution for minimizing leakage. Reference: LEED Reference Guide for Homes Design and Construction, v4, EA Credit: Air Infiltration, p. 124. D . Specifying HERS Grade II Insulation: HERS (Home Energy Rating System) insulation grades refer to the quality of insulation installation, with Grade II indicating moderate defects. While proper insulation reduces conductive heat loss, it does not directly address air leakage, which is managed by the air barrier system. Reference: LEED Reference Guide for Homes Design and Construction, v4, EA Credit: Insulation, p. 120, which discusses HERS insulation grades but not air leakage. The LEED AP Homes Candidate Handbook emphasizes the importance of understanding EA credits, including air infiltration, for the exam, referencing the LEED Reference Guide for Homes Design and Construction as a key study resource. The handbook confirms that the exam is based on LEED v4, ensuring the relevance of the continuous air barrier requirement. References: LEED Reference Guide for Homes Design and Construction, v4, USGBC, Energy and Atmosphere Prerequisite: Minimum Energy Performance, p. 112, and EA Credit: Air Infiltration, p. 124. LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.usgbc.org/credits). LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4). USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org/resources/leed-homes-design-and-construction-v4).
Question 2
For a site in a town with a population of 10,000 to qualify under Location and Transportation Credit, Site Selection, Option 2: Infill Development, what portion of the site’s perimeter must border previously disturbed land?
Correct Answer: C
Explanation:
The LEED for Homes Rating System (v4) outlines the requirements for the Location and Transportation (LT) Credit: Site Selection, which includes Option 2: Infill Development. This credit encourages development on sites that minimize environmental impact by utilizing previously disturbed or developed land. For a site to qualify as infill development, a specific portion of its perimeter must border land that has been previously disturbed. According to the LEED Reference Guide for Homes Design and Construction (v4), the requirement for Option 2: Infill Development is as follows: Option 2. Infill Development (1 point) Select a lot such that at least 75% of the perimeter of the project site immediately borders parcels that are previously developed or that have been graded or otherwise altered by direct human activities. Source: LEED Reference Guide for Homes Design and Construction, v4, Location and Transportation Credit: Site Selection, p. 54. This means that 75% of the site’s perimeter must border previously disturbed land to meet the infill development criteria. The population of the town (10,000 in this case) does not directly affect the infill development requirement but may be relevant for other LT credits, such as Access to Quality Transit or Neighborhood Pattern and Design, which consider community size or density. However, for Site Selection, Option 2, the focus is solely on the perimeter bordering previously disturbed land. The LEED v4.1 for Homes rating system aligns with this requirement, as it maintains the same infill development criteria for residential projects under the LT category: LT Credit: Site Selection, Option 2. Infill Development At least 75% of the project site’s perimeter must border previously developed or disturbed parcels. Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online. The LEED AP Homes Candidate Handbook confirms that the exam tests knowledge of the LEED v4 rating system, including the LT credits, and references the LEED Reference Guide for Homes Design and Construction as a primary study resource. The handbook does not alter the technical requirements but emphasizes understanding credit intent and compliance paths, such as the infill development perimeter rule. Why not the other options? A . 25%: This is too low and does not meet the minimum threshold for infill development, which requires significant adjacency to previously disturbed land to ensure compact, sustainable development. B . 50%: While closer, 50% still falls short of the 75% requirement, which is designed to prioritize sites fully integrated into existing developed areas. D . 100%: Requiring 100% of the perimeter to border previously disturbed land is overly restrictive and not specified in the LEED v4 or v4.1 requirements. References: LEED Reference Guide for Homes Design and Construction, v4, USGBC, Location and Transportation Credit: Site Selection, p. 54. LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.usgbc.org/credits). LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4). USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org/resources/leed-homes-design-and-construction-v4). LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming alignment with v4 infill requirements.
Demo Practice Mode
You are viewing only the questions marked as Demo.